Welcome to visit The Chinese Journal of Process Engineering, Today is
Process & Technology

Calculation Model for Determining Economical Continuous Casting Heats in Multi-functional Hot Metal Ladle Mode

  • Fei YUAN Anjun XU Dongfeng HE Zongxi GU Kai FENG Jingbo LIU
Expand
  • 1. School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083, China; 
    2. Chongqing Iron and Steel Co., Ltd., Chongqing 401258, China

Received date: 2017-02-22

  Revised date: 2017-04-16

  Online published: 2017-08-16

Abstract

Calculation model of economical continuous casting heats both in the case of the sufficient and balanced (inadequate) heat supply for BOF was established respectively with the objective of the optimal comprehensive cost. The minimum cost losses could be obtained when the cost losses due to ladle preparation was subtracted from that of the sum of the refractory of the tundish and the molten steel recovery rate. Selecting the steel grade SPHC of No.2 caster in Chongqing Iron & Steel Co., Ltd. as investigation case, the model is applied to calculate the economical continuous casting heats, whose result are 16 and 15 with the sufficient and balanced (inadequate) converter heat supply, respectively.

Cite this article

Fei YUAN Anjun XU Dongfeng HE Zongxi GU Kai FENG Jingbo LIU . Calculation Model for Determining Economical Continuous Casting Heats in Multi-functional Hot Metal Ladle Mode[J]. The Chinese Journal of Process Engineering, 2017 , 17(4) : 779 -784 . DOI: 10.12034/j.issn.1009-606X.217146

Outlines

/