Welcome to visit The Chinese Journal of Process Engineering, Today is
Process & Technology

Dissolution Behavior of Lime Particles in CaO-FeO-SiO2-P2O5 Slag

  • Yunjin XIA Xiaopan LI Jie LI Dingdong FAN Xin GUO
Expand
  • 1. School of Metallurgical Engineering, Anhui University of Technology, Ma′anshan, Anhui 243002, China; 2. Key Lab of Metallurgical Emission Reduction & Resources Recycling, Ministry of Education, Ma′anshan, Anhui 243002, China

Received date: 2017-01-17

  Revised date: 2017-02-18

  Online published: 2017-10-10

Abstract

The dissolution behavior of lime particles in CaO?FeO?SiO2?P2O5 slag at 1400℃ was studied by putting the average size about 70 ?m lime into the CaO?SiO2 saturated slag. The results showed that six areas were formed along calcium oxide around after the lime particles were adding into the slag, namely unmelted calcium oxide region, transition layer of lime dissolution transformation to calcium ferrite, calcium ferrite layer, discontinuous solid solution layer, dense solid solution layer and original slag. The C2S?C3P solid solution was formed in 5 s, its P2O5 content reached the maximum about 120 s, then the size of solid solution increased and P2O5 content decreased with time. When P2O5 was in slag, the xC2S?C3P layer was formed in the reaction interface of lime, instead of C2S, the formation of C2S?C3P solid solution layer prevented the dissolution of lime.

Cite this article

Yunjin XIA Xiaopan LI Jie LI Dingdong FAN Xin GUO . Dissolution Behavior of Lime Particles in CaO-FeO-SiO2-P2O5 Slag[J]. The Chinese Journal of Process Engineering, 2017 , 17(5) : 1041 -1046 . DOI: 10.12034/j.issn.1009-606X.217121

References

[1] 陈晨.转炉炼钢快速成渣工艺探讨[J].武钢技术,1998,7:9-13
[2] Mikio UMAKOSHI, Katsumi MORI and Yasuji KAWAI. Dissolution Rate of Burnt Dolomite in Molten FetO-CaO-SiO2Slags[J]. 1984, Trans. ISIJ, 24(7):532-539
[3] Tasuku HAMANO, Masashi HORIBE and Kimihisa ITO. The Dissolution Rate of Solid Lime into Molten Slag Used for Hot-metal Dephosphorization[J]. ISIJ International, 2004, 44 (2): 263-267
[4] Shahriar AMINI, Michael BRUNGS and Oleg OSTROVSKI. Dissolution of Dense Lime in Molten Slags under Static Conditions[J]. ISIJ International, 2007, 47 (1):32-37
[5] Nobuhiro Maruoka, Akira Ishikawa, Hiroyuki Shibata, et al. Dissolution Rate of Various Limes into Steelmaking Slag[J]. High Temp. Mater. Proc. 2013,32(1): 15-24
[6] Nobuhiro Maruoka, Akira Ishikawa, Hiroyuki Shibata, et al. Influence of formation layer around CaO on the dissolution rate in steelmaking slag[J]. CAMP-ISIJ, 2012, 25(3):217-220
[7] Jian YANG, Mamoru KUWABARA, Takashi ASANO, et al. Effect of Lime Particle Size on Melting Behavior of Lime-containing Flux[J]. ISIJ International, 2007, 47(10):1401-1408.
[8] 苏畅,于景坤,王洪章. 2CaO?SiO2-3CaO?P2O5固溶体形成机理[J].东北大学学报,2013,34(10):1434-1437.
[9] Yang X, Matsuura H, Tsukihashi F. Condensation of P2O5 at the Interface between 2CaOSiO2 and CaO-SiO2-FeOx-P2O5 Slag [J].ISIJ International, 2009, 49(9):1298-1307.
Outlines

/