[1]陶然, 权晓波, 徐建中.微尺度流动研究中的几个问题[J].工程热物理学报, 2001, 22(05):575-577
[2]DENG W, KLEMIC J F, LI X, et al.Liquid fuel microcombustor using microfabricated multiplexed electrospray sources[J].Proceedings of the Combustion Institute, 2007, 31(2):2239-2246
[3]FERNANDEZ-PELLO A C.Micropower generation using combustion: Issues and approaches[J].Proceedings of the Combustion Institute, 2002, 29(1):883-899
[4]SAHOTA G P S, KHANDELWAL B, KUMAR S.Experimental investigations on a new active swirl based microcombustor for an integrated micro-reformer system[J].Energy Conversion and Management, 2011, 52(10):3206-3213
[5]孙冰, 朱红伟, 姜杰, 等.微混合与微反应技术在提升化工安全中的应用[J].化工进展, 2017, 36(08):2756-2763
[6]WANG L, MA H, SHEN Z.The quenching of propane deflagrations by crimped ribbon flame arrestors[J].Journal of Loss Prevention in the Process Industries, 2016, 43:567-574
[7]CAPP B.Temperature rise of a rigid element flame arrester in endurance burning with propane[J].Journal of Loss Prevention in the Process Industries, 1992, 5(4):215-218
[8]HOWARD W B.Flame arresters and flashback preventers[J].PlantOperations Progress, 1982, 1(4):203-208
[9]中华人民共和国国家质量监督检验检疫总局，中国国家标准化管理委员会.石油气体管道阻火器 GB/T 13347-2010[S]. 北京: 中国标准出版社, 2011.
[10]WU M H, KUO W C.Accelerative expansion and DDT of stoichiometric ethyleneoxygen flame rings in micro-gaps[J].Proceedings of the Combustion Institute, 2013, 34(2):2017-2024
[11]邓博, 胡宗民, 滕宏辉, 等.变截面管道中爆轰胞格演变机制的数值模拟研究[J].中国科学辑物理学力学天文学, 2008, 38(02):206-216
[12]TONG Y, LI M, THERN M, et al.Experimental investigation on effects of central air jet on the bluff-body stabilized premixed methane-air flame[J].Energy Procedia, 2017, 107:23-32
[13]DOROFEEV S B.Hydrogen flames in tubes: Critical run-up distances[J].International Journal of Hydrogen Energy, 2009, 34(14):5832-5837
[14]GUO J, SUN X, RUI S, et al.Effect of ignition position on vented hydrogen–air explosions[J].International Journal of Hydrogen Energy, 2015, 40(45):15780-15788
[15]BROUSTAIL G, SEERS P, HALTER F, et al.Experimental determination of laminar burning velocity for butanol and ethanol iso-octane blends[J].Fuel, 2011, 90(1):1-6
[16]MIAO H, JIAO Q, HUANG Z, et al.Effect of initial pressure on laminar combustion characteristics of hydrogen enriched natural gas[J].International Journal of Hydrogen Energy, 2008, 33(14):3876-3885
[17]PEKALSKI A A, ZEVENBERGEN J F, LEMKOWITZ S M, et al.A review of explosion prevention and protection systems suitable as ultimate layer of protection in chemical process installations[J].Process Safety and Environmental Protection, 2005, 83(1):1-17
[18]GRABARCZYK M, TEODORCZYK A, DI SARLI V, et al.Effect of initial temperature on the explosion pressure of various liquid fuels and their blends[J].Journal of Loss Prevention in the Process Industries, 2016, 44:775-779
[19]李传家, 王伯良, 黄菊, 等.爆炸形成过程中火焰加速的试验研究[J].中国安全科学学报, 2011, 21(10):76-81
[20]年志远.平板狭缝间碳氢燃料微小火焰特性的实验研究[D]. 郑州: 郑州大学, 2016: 17.
[21]中华人民共和国国家质量监督检验检疫总局, 中国国家标准化管理委员会.爆炸性环境 第11部分：由隔爆外壳" d" 保护的设备最大试验安全间隙测定方法: GB 3836.11-2008/IEC 60079-1-1:2002[S]. 北京: 中国标准出版社, 2008.
[22]STREHLOW R A, NICHOLLS J A, MAGISON E C, et al.An investigation of the maximum experimental safe gap anomaly[J].Journal of Hazardous Materials, 1979, 3(1):1-15
[23]PHILLIPS H.Differences between determinations of maximum experimental safe gap in Europe and US.A[J].Journal of Hazardous Materials, 1981, 4(3):245-256
[24]LUNN G A.An apparatus for the measurement of maximum experimental safe gaps at standard and elevated temperatures[J].Journal of Hazardous Materials, 1982, 6(4):329-340
[25]CAPP B.The maximum experimental safe gap for a spray of higher flash point liquid[J].Journal of Hazardous Materials, 1988, 18(1):91-97
[26]BOULAL S, VIDAL P, ZITOUN R.Experimental investigation of detonation quenching in non-uniform compositions[J].Combustion and Flame, 2016, 172:222-233
[27]WU M H, KUO W C.Accelerative expansion and DDT of stoichiometric ethyleneoxygen flame rings in micro-gaps[J].Proceedings of the Combustion Institute, 2013, 34(2):2017-2024
[28]BAUER P.Experimental investigation on flame and detonation quenching: Applicability of static flame arresters[J].Journal of Loss Prevention in the Process Industries, 2005, 18(2):63-68
[29]WEI H, ZHAO J, ZHOU L, et al.Effects of the equivalence ratio on turbulent flame–shock interactions in a confined space[J].Combustion and Flame, 2017, 186:247-262
[30]SANCHEZ–SANZ M, FERNANDEZ-GALISTEO D, KURDYUMOV V N.Effect of the equivalence ratio,Damk?hler number,Lewis number and heat release on the stability of laminar premixed flames in microchannels[J].Combustion and Flame, 2014, 161(5):1282-1293
[31]WANG T, ZHANG X, ZHANG J, et al.Numerical analysis of the influence of the fuel injection timing and ignition position in a direct-injection natural gas engine[J].Energy Conversion and Management, 2017, 149:748-759
[32]WANG Y, WANG J.Effect of equivalence ratio on the velocity of rotating detonation[J].International Journal of Hydrogen Energy, 2015, 40(25):7949-7955
[33]WANG Z, MOTHEAU E, ABRAHAM J.Effects of equivalence ratio variations on turbulent flame speed in lean methaneair mixtures under lean-burn natural gas engine operating conditions[J].Proceedings of the Combustion Institute, 2017, 36(3):3423-3430
[34]LV X, ZHENG L, ZHANG Y, et al.Combined effects of obstacle position and equivalence ratio on overpressure of premixed hydrogen–air explosion[J].International Journal of Hydrogen Energy, 2016, 41(39):17740-17749
[35]LAPP K, WERNEBURG H.Detonation flame arrester qualifying application parameter for explosion prevention in vapor handling systems[J].Process Safety Progress, 1995, 14(2):139-146
[36]何学超.丙烷空气预混火焰在90°弯曲管道内传播特性的实验和模拟研究[D]. 合肥: 中国科学技术大学, 2010: 40.
[37]蒋利桥.微尺度火焰及微燃烧器的稳燃强化技术研究[D]. 合肥: 中国科学技术大学, 2008: 38.
[38]WU M H, KUO W C.Transmission of near-limit detonation wave through a planar sudden expansion in a narrow channel[J].Combustion and Flame, 2012, 159(11):3414-3422
[39]WU M H, WANG C Y.Reaction propagation modes in millimeter-scale tubes for ethyleneoxygen mixtures[J].Proceedings of the Combustion Institute, 2011, 33(2):2287-2293
[40]KIM N I, KATO S, KATAOKA T, et al.Flame stabilization and emission of small swiss-roll combustors as heaters[J].Combustion and Flame, 2005, 141(3):229-240
[41]IL KIM N, AIZUMI S, YOKOMORI T, et al.Development and scale effects of small swiss-roll combustors[J].Proceedings of the Combustion Institute, 2007, 31(2):3243-3250
[42]ZHONG B J, WANG J H.Experimental study on premixed CH4air mixture combustion in micro swiss-roll combustors[J].Combustion and Flame, 2010, 157(12):2222-2229
[43]KASHIR B, TABEJAMAAT S, JALALATIAN N.The impact of hydrogen enrichment and bluff-body lip thickness on characteristics of blended propane/hydrogen bluff-body stabilized turbulent diffusion flames[J].Energy Conversion and Management, 2015, 103:1-13
[44]JEONG C, BAE J, KIM T, et al.Investigation of flashback characteristics coupled with combustion instability in turbulent premixed bluff body flames using high-speed OH-PLIF and PIV[J].Proceedings of the Combustion Institute, 2017, 36(2):1861-1868
[45]FAN A, ZHANG H, WAN J.Numerical investigation on flame blow-off limit of a novel microscale swiss-roll combustor with a bluff-body[J].Energy, 2017, 123:252-259
[46]YAN Y, WANG H, PAN W, et al.Numerical study of effect of wall parameters on catalytic combustion characteristics of CH4/air in a heat recirculation micro-combustor[J].Energy Conversion and Management, 2016, 118:474-484
[47]YAN Y, HUANG W, TANG W, et al.Numerical study on catalytic combustion and extinction characteristics of pre-mixed methane–air in micro flatbed channel under different parameters of operation and wall[J].Fuel, 2016, 180:659-667
[48]OKAWA Y, YOUN C, KAGAWA T.A study of the characteristics of flow rate and extinction in a flame arrester with radial slit structure[J].Journal of Loss Prevention in the Process Industries, 2012, 25(2):242-249
[49]LIETZE D.Crimped metal ribbon flame arrestors for the protection of gas measurement systems[J].Journal of Loss Prevention in the Process Industries, 2002, 15(1):29-35
[50]YENERDAG B, MINAMOTO Y, NAKA Y, et al.Flame propagation and heat transfer characteristics of a hydrogen–air premixed flame in a constant volume vessel[J].International Journal of Hydrogen Energy, 2016, 41(22):9679-9689
[51]CHIA L C, FENG B.The development of a micropower (micro-thermophotovoltaic) device[J].Journal of Power Sources, 2007, 165(1):455-480
[52]YUASA S, OSHIMI K, NOSE H, et al.Concept and combustion characteristics of ultra-micro combustors with premixed flame[J].Proceedings of the Combustion Institute, 2005, 30(2):2455-2462
[53]WAN J, FAN A.Effect of solid material on the blow-off limit of CH4/air flames in a micro combustor with a plate flame holder and preheating channels[J].Energy Conversion and Management, 2015, 101:552-560
[54]KIM K T, LEE D H, KWON S.Effects of thermal and chemical surface–flame interaction on flame quenching[J].Combustion and Flame, 2006, 146(1):19-28
[55]冯耀勋, 杨浩林, 赵黛青.壁面材料对微火焰熄火影响的实验研究[J].热能动力工程, 2013, 28(01):61-67
[56]FAN Y, SUZUKI Y, KASAGI N.Experimental study of micro-scale premixed flame in quartz channels[J].Proceedings of the Combustion Institute, 2009, 32(2):3083-3090
[57]王恩宇.气体燃料在渐变型多孔介质中的预混燃烧机理研究[D]. 杭州: 浙江大学, 2004: 20.
[58]MIESSE C M, MASEL R I, JENSEN C D, et al.Submillimeter-scale combustion[J].AIChE Journal, 2004, 50(12):3206-3214
[59]LIETZE D.Limit of safety against flame transmission for sintered metal flame arrester elements in the case of flashback in fuel gasoxygen mixtures[J].Journal of Loss Prevention in the Process Industries, 1995, 8(6):325-329
[60]PAYMAN W, WHEELER R V.The propagation of flame through tubes of small diameter[J].Journal of the Chemical Society, Transactions, 1918, 113(0):656-666
[61]喻健良.预混火焰在微小通道中传播和淬熄的研究[D]. 大连: 大连理工大学, 2008: 9.
[62]RAIMONDEAU S, NORTON D, VLACHOS D G, et al.Modeling of high-temperature microburners[J].Proceedings of the Combustion Institute, 2002, 29(1):901-907
[63]BAI B, CHEN Z, ZHANG H, et al.Flame propagation in a tube with wall quenching of radicals[J].Combustion and Flame, 2013, 160(12):2810-2819
[64]SAIKI Y, SUZUKI Y.Effect of wall surface reaction on a methane-air premixed flame in narrow channels with different wall materials[J].Proceedings of the Combustion Institute, 2013, 34(2):3395-3402
[65]张立志, 赵黛青, 冯耀勋, 等.壁面反应对微小通道内燃烧影响的数值模拟[J].工程热物理学报, 2011, 32(11):1973-1978
[66]SAIKI Y, FAN Y, SUZUKI Y.Radical quenching of metal wall surface in a methane-air premixed flame[J].Combustion and Flame, 2015, 162(10):4036-4045
[67]CICORIA D, CHAN C K.Large eddy simulation of lean turbulent hydrogen-enriched methane-air premixed flames at high Karlovitz numbers[J].International Journal of Hydrogen Energy, 2016, 41(47):22479-22496
[68]FAN A, WAN J, LIU Y, et al.Effect of bluff body shape on the blow-off limit of hydrogenair flame in a planar micro-combustor[J].Applied Thermal Engineering, 2014, 62(1):13-19
[69]GIOVANNONI V, SHARMA R N, RAINE R R.Premixed combustion of methane–air mixture stabilized over porous medium: A 2D numerical study[J].Chemical Engineering Science, 2016, 152:591-605
[70]LI J, CHOU S K, YANG W M, et al.A numerical study on premixed micro-combustion of CH4–air mixture: Effects of combustor size,geometry and boundary conditions on flame temperature[J].Chemical Engineering Journal, 2009, 150(1):213-222
[71]LI X, ZHANG J, YANG H, et al.Combustion characteristics of non-premixed methane micro-jet flame in coflow air and thermal interaction between flame and micro tube[J].Applied Thermal Engineering, 2017, 112:296-303
[72]KONAKOV S A, DZYUBANENKO S V, KRZHIZHANOVSKAYA V V.Computer simulation approach in development of propane-air combustor microreactor[J].Procedia Computer Science, 2016, 101:76-85
[73]张义贵.微尺度多孔介质中燃烧的电容层析成像应用研究[D]. 北京: 中国科学院研究生院（工程热物理研究所）, 2008: 47.
[74]BEAR J.Dynamics of fluids in porous media[M]. American Elsevier Publishing Company, 1972: 177.
[75]HIATT J P, HALL M J.Pore scale turbulence in porous ceramic burners[J].Proceedings of the Central States Section Meeting of Combustion Institute, 1994, :49-54
[76]陈作义.交叉三角形波纹板流道传热与流动特性的研究[D]. 广州: 华南理工大学, 2012: 48.
[77]KUO C H, RONNEY P D.Numerical modeling of non-adiabatic heat-recirculating combustors[J].Proceedings of the Combustion Institute, 2007, 31(2):3277-3284
[78]林瑞泰.多孔介质传热传质引论[M]. 科学出版社, 1995: 57.
[79]黄青山.多相环流反应器的传递和反应性能数值模拟[D]. 北京: 中国科学院大学, 2008: 43.
[80]MOUKALLED F, DARWISH M.A high-resolution pressure-based algorithm for fluid flow at all speeds[J].Journal of Computational Physics, 2001, 168(1):101-130
[81]MIETTINEN A, SIIKONEN T.Application of pressure‐ and density‐based methods for different flow speeds[J].International Journal for Numerical Methods in Fluids, 2015, 79(5):243-267
[82]杨越, 陈正, 周豪, 等.高雷诺数预混湍流火焰的数值模拟与结构表征[J].中国科学:物理学 力学 天文学, 2017, 47(07):46-61
[83]MIYATA E, FUKUSHIMA N, NAKA Y, et al.Direct numerical simulation of micro combustion in a narrow circular channel with a detailed kinetic mechanism[J].Proceedings of the Combustion Institute, 2015, 35(3):3421-3427
[84]VENDRA C M R, WEN J X, TAM V H Y.Numerical simulation of turbulent flame–wall quenching using a coherent flame model[J].Journal of Loss Prevention in the Process Industries, 2013, 26(2):363-368
[85]BENIM A C, IQBAL S, MEIER W, et al.Numerical investigation of turbulent swirling flames with validation in a gas turbine model combustor[J].Applied Thermal Engineering, 2017, 110:202-212
[86]GAO Z, JIANG C, LEE C H.On the laminar finite rate model and flamelet model for supersonic turbulent combustion flows[J].International Journal of Hydrogen Energy, 2016, 41(30):13238-13253
[87]熊模友, 乐嘉陵, 黄渊, 等.采用火焰面反应进度变量方法模拟湍流燃烧[J].航空动力学报, 2016, 31(11):2604-2612
[88]曾卓雄, 郭帅帅, 陈超杰, 等.可控涡结构的三维湍流燃烧特性的数值分析[J].热能动力工程, 2016, 31(06):42-47
[89]GHAREBAGHI M, IRONS R M A, MA L, et al.Large eddy simulation of oxy-coal combustion in an industrial combustion test facility[J].International Journal of Greenhouse Gas Control, 2011, 5:S100-S110
[90]DAVANI A A, RONNEY P D.A jet-stirred chamber for turbulent combustion experiments[J].Combustion and Flame, 2017, 185:117-128
[91]ZHANG K, GHOBADIAN A, NOURI J M.Comparative study of non-premixed and partially-premixed combustion simulations in a realistic tay model combustor[J].Applied Thermal Engineering, 2017, 110:910-920
