Welcome to visit The Chinese Journal of Process Engineering, Today is

Preparation of Carbonized MUF-g-PMAA Material and Its Adsorption Property to Cu(II)

  • WANG Yan-jun HU Tuo-ping GAO Jian-feng AN Fu-qiang OU Guo-li WANG Yu ZHOU Jun-li
Expand
  • School of Science, North University of China School of Science, North University of China School of Science, North University of China Department of Chemical Engineering, North University School of Science, North University of China School of Science, North University of China School of Science, North University of China

Received date: 2015-07-20

  Revised date: 2015-08-28

  Online published: 2015-10-20

Abstract

The monomer of methacrylic acid (MAA) was grafted on the surface of melamine-urea-formaldehyde (MUF) resin by using the redox initiating system formed by amino and persulfate, the grafted material MUF-g-PMAA was achieved. After carbonization at low-temperature, the carbonized material with more stable properties was obtained. The effects of temperature and pH value on the adsorption property of carbonized MUF-g-PMAA to Cu2+ were examined. The results indicated that the adsorption capacity of carbonized MUF-g-PMAA to Cu2+ reached up to 36.1 mg/g at pH=5.0 and 30℃. The adsorption capacity increased firstly and then decreased with temperature, and increased with pH value. Besides, the adsorption process conformed to the Langmuir adsorption isotherm model and pseudo-second kinetic equation.

Cite this article

WANG Yan-jun HU Tuo-ping GAO Jian-feng AN Fu-qiang OU Guo-li WANG Yu ZHOU Jun-li . Preparation of Carbonized MUF-g-PMAA Material and Its Adsorption Property to Cu(II)[J]. The Chinese Journal of Process Engineering, 2015 , 15(5) : 854 -859 . DOI: 10.12034/j.issn.1009-606X.215273

Outlines

/