欢迎访问过程工程学报, 今天是
过程与工艺

酯交换-吸附脱乙醇联合工艺合成乙酸异辛酯

  • 丁斌 郝凤岭 关昶 李祥 王海东 刘群
展开

收稿日期: 2014-11-15

  修回日期: 2015-03-19

  网络出版日期: 2015-06-20

Synthesis of Isooctyl Acetate by Transesterification and Removal of Alcohol with Adsorption

  • DING Bin HAO Feng-ling GUAN Chang LI Xiang WANG Hai-dong LIU Qun
Expand
  • Department of Chemical Engineering Jilin Institute of Chemical Technology Department of Chemical Engineering Jilin Institute of Chemical Technology Department of Chemical Engineering Jilin Institute of Chemical Technology Department of Chemical Engineering Jilin Institute of Chemical Technology Department of Chemical Engineering Jilin Institute of Chemical Technology Department of Chemical Engineering Jilin Institute of Chemical Technology

Received date: 2014-11-15

  Revised date: 2015-03-19

  Online published: 2015-06-20

摘要

以乙酸乙酯和异辛醇为原料、阳离子交换树脂NKC-9为催化剂,通过酯交换反应,采用4A分子筛吸附脱乙醇技术合成乙酸异辛酯,考察了原料配比、催化剂用量和反应时间等因素对酯交换反应的影响. 结果表明,较佳的酯交换反应工艺条件为:乙酸乙酯与异辛醇摩尔比3.0:1,NKC-9为初始原料质量的6.0%,反应温度≤98℃,反应时间4.0 h. 在该条件下,反应液中乙酸异辛酯含量为60.51%.

本文引用格式

丁斌 郝凤岭 关昶 李祥 王海东 刘群 . 酯交换-吸附脱乙醇联合工艺合成乙酸异辛酯[J]. 过程工程学报, 2015 , 15(3) : 463 -467 . DOI: 10.12034/j.issn.1009-606X.214310

Abstract

Isooctyl acetate was synthesized with ethyl acetate and iso-octyl alcohol as raw materials, cation exchange resin NKC-9 as catalyst and 4A zeolite as dealcohol adsorbent. The effects of molar ratio of ethyl acetate to isooctyl alcohol, catalyst dosage, reaction temperature and time on the transesterification were examined. The results showed that the optimum reaction conditions were obtained as the molar ratio of ethyl acetate to isooctyl alcohol at 3.0:1, catalyst dosage 6.0% (referring to total mass of ethyl acetate and isooctyl alcohol), reaction temperature ≤98℃, and reaction time 4.0 h. Under the conditions, the content of isooctyl acetate in the reaction solution could achieve 60.51%.
文章导航

/