全固态锂离子电池技术进展及现状

刘鲁静 贾志军 郭强 王毅 齐涛

doi:10.12034/j.issn.1009-606X.218331

过程工程学报 >

2019 , Vol. 19 >Issue 5: 900 - 909

DOI: https://doi.org/10.12034/j.issn.1009-606X.218331

综述

全固态锂离子电池技术进展及现状

刘鲁静贾志军郭强王毅齐涛

展开

中国科学院过程工程研究所湿法冶金清洁生产技术国家工程实验室，北京 100190

收稿日期: 2018-11-25

修回日期: 2019-02-22

网络出版日期: 2019-10-22

基金资助

钯基双金属催化剂的设计制备及其在氧气电还原过程中的表界面问题研究;液流锂离子电池电极反应的界面微观机理及动力学研究

收起

Research progress and current status of all-solid-state lithium battery

Lujing LIU Zhijun JIA Qiang GUO Yi WANG Tao QI

Expand

National Engineering Laboratory for Hydrometallurgical Cleaner Production Technology, Institute of Process Engineering, Chinese Academy of Sciences, Beijing 100190, China

Received date: 2018-11-25

Revised date: 2019-02-22

Online published: 2019-10-22

Fold

摘要

锂离子电池电解质多为有机液体，易燃易爆、安全性差。用固态电解质制备的全固态锂离子电池，具有电化学窗口宽、能量密度大和安全性高等优点，是电动汽车和规模化储能应用的理想化学电源。本工作主要介绍了全固态电解质的电解质材料及电极/电解质界面调控与机理问题，为改善固/固界面相容性及降低界面阻抗方面提供解决方案。阐述了目前主流的正负极材料、全固态锂离子电池的设计及目前的专利申请状况，简要讨论了全固态锂离子电池面临的主要问题，并从产业应用角度展望了其应用现状和未来发展趋势，为从业者全面了解全固态电池的发展提供有利依据。

关键词： 全固态锂离子电池; 固态电解质; 固/固界面; 电极材料; 界面阻抗

本文引用格式

刘鲁静贾志军郭强王毅齐涛 . 全固态锂离子电池技术进展及现状[J]. 过程工程学报, 2019 , 19(5) : 900 -909 . DOI: 10.12034/j.issn.1009-606X.218331

Abstract

Organic liquids are usually used as electrolytes in lithium-ion batteries, which are poor in safety and easy to burn and explode. In the all-solid-state lithium battery (ASSB), all solid electrolytes are applied instead of the traditional organic liquid electrolytes. Compared with lithium-ion batteries, ASSBs have the advantages of wide electrochemical window, high energy density and safety. They are potential chemical power sources in electric vehicles and large-scale energy storage applications. At present, there are more than 20 manufacturing companies, start-up companies and university research institutes around the world dedicated to ASSB technology. Main purpose is to seek a breakthrough in material preparation technology, including the preparation of electrode materials as well as the technology which can enable the positive and negative electrodes match well with the solid electrolyte materials. In this review, the research progress of ASSB technology and key materials, especially all-solid electrolyte materials, as well as the control and mechanism of electrode/electrolyte interface were introduced, and the solutions for improving solid/solid interface compatibility and reducing interface impedance were provided. Among them, solid electrolyte materials with high ionic conductivity, such as PEO-based polymer electrolyte, NASICON and Garnet oxide electrolyte and sulfide electrolyte were detailed presented. This work also provided the current mainstream positive and negative electrode materials, ASSB design and current patent application status. Based on that, the main problems faced by ASSBs were briefly discussed, such as the lower electrical conductivity of solid electrolytes, poor battery rate, as well as the solid interface problems of electrode/electrolyte, including high interface impedance, poor interface stability, and interface stress changes, which could lead to the poor circulation life of ASSBs. The application status and future development trend of ASSBs were summarized and prospected from the perspective of industrial applications, which gave the future research directions and solutions. This review provided a favorable basis for the comprehensive understanding of the development of ASSBs.Key learning points (1) The potential solid electrolyte materials for large-scale industrial applications include NASICON, Garnet oxide electrolyte, sulfide electrolyte and polymer electrolyte, etc. (2) The study of solid/solid electrolyte (solid/solid) interface has not reached the level of solid/liquid electrolyte (solid/liquid) interface. Problems such as large interface impedance, poor interface stability, and interface stress change have not been solved. (3) It is urgent to develop new positive and negative electrode materials with high energy and stability, and to determine the best combination of electrode materials and solid electrolytes.

Key words： All-solid-lithium battery; Solid electrolyte; Electrode/electrolyte interface; Electrode materials; Interface impedance

参考文献

[1] Kanno R, Hata T, Kawamoto Y, et al. Synthesis of a new lithium ionic conductor, thio-LISICON–lithium germanium sulfide system[J]. Solid State Ionics, 2000, 130(1–2):97-104.
[2] Sun C, Liu J, Gong Y, et al. Recent advances in all-solid-state rechargeable lithium batteries[J]. Nano Energy, 2017, 33:363-386.
[3] Zheng N, Bu X, Feng P. Synthetic design of crystalline inorganic chalcogenides exhibiting fast-ion conductivity[J]. Nature, 2003, 35(7):428-32.
[4] B A Boukamp, R A Huggins. Mat. Res. Fast ionic conductivity in lithium nitride[J]. Materials Research Bulletin, 1978, 13(1):23-32.
[5] Yu X, Bates J B, Jellison G E, et al. A stable thin film lithium electrolyte: lithium phosphorus oxynitride[J]. Journal of the electrochemical society, 1997, 144(2):524-532.
[6] Li Y, Xu H, Chiem P H, et al. A stable perovskite electrolyte in moist air for Li-ion batteries[J]. Angewandte Chemie International Edition, 2018, 57(28):1433-7851.
[7] Birke P, Scharner S, Huggins R A et al. Electrolytic Stability Limit and Rapid Lithium Insertion in the Fast Ion Conducting Li0.29La0.57TiO3 Perovskite Type Compound[J]. Journal of The Electrochemical Society, 1997, 144: L167–L169.
[8] Knauth P. Inorganic solid Li ion conductors: An overview[J]. Solid State Ionics, 2009, 180(14):911-916.
[9] Oguni M, Inaguma Y, Itoh M, et al. Calorimetric and electrical studies on the positional disorder of lithium ions in lithium lanthanum titanate[J]. Solid State Communications, 1994, 91(8):627-630.
[10] Cussen E J. The Structure of Lithium Garnets: Cation Disorder and Clustering in a New Family of Fast Li+, Conductors[J]. Cheminform, 2006, 37(15):412-413.
[11] Mo Y, Ong S P, Ceger G. First Principles Study of the Li10GeP2S12 Lithium Super Ionic Conductor Material[J]. Chemistry of Materials, 2012, 24(1):15–17.
[12] Wan H, Peng G, Yao X, et al. Cu2 ZnSnS4 /graphene nanocomposites for ultrafast, long life all-solid-state lithium batteries using lithium metal anode[J]. Energy Storage Materials, 2016, 4:59-65.
[13] Tetsuya A, Akihiro S, Satoru O, et al. Solid Halide Electrolytes with High Lithium-Ion Conductivity for Application in 4V Class Bulk-Type All-Solid-State Batteries[J]. Advanced Materials, 2018, 1803075
[14] Yao X, Liu D, Wang C, et al. High-Energy All-Solid-State Lithium Batteries with Ultralong Cycle Life[J]. Nano Letter. 2016, 16, 7148-7154.
[15] Ong S P, Mo Y, Richards W D, et al. Phase stability, electrochemical stability and ionic conductivity of the Li[subscript 10±1]MP[subscript 2]X[subscript 12] (M = Ge, Si, Sn, Al or P, and X = O, S or Se) family of superionic conductors[J]. Energy & Environmental Science, 2012, 6(1):148-156.
[16] Yoon K, Kim J J, Seong W M, et al. Investigation on the interface between Li10GeP2S12 electrolyte and carbon conductive agents in all-solid-state lithium battery[J]. Scientific Reports, 2018, 8(1):8066.
[17] Muramatsu H, Hayashi A, Ohtomo T, et al. Structural change of Li2S–P2S5, sulfide solid electrolytes in the atmosphere[J]. Solid State Ionics, 2011, 182(1):116-119.
[18] Inaguma Y, Chen L, Itoh M, et al. High ionic conductivity in lithium lanthanum titanate[J]. Solid State Communications, 1993, 86(10):689-693.
[19] Culver S P, Koerver R, Krauskopf T, et al. Designing ionic conductors: the interplay between structural phenomena and interfaces in thiophosphate-based solid-state batteries[J]. Chemistry of Materials, 2018, 30: 4179-4192.
[20] Ohta N, Takada K, Zhang L, et al. Enhancement of the High-Rate Capability of Solid-State Lithium Batteries by Nanoscale Interfacial Modification ?[J]. Advanced Materials, 2006, 18(17):2226-2229.
[21] Takada K. Interfacial nanoarchitectonics for solid-state lithium batteries[J]. Langmuir, 2013, 29(24):7538-7541.
[22] Xu X, Takada K, Watanabe K, et al. Recent Progress in Interfacial Nanoarchitectonics in Solid-State Batterie[J]. Chemistry of Materials, 2011, 23: 3798–3804.
[23] Woo J H, Trecey J E, Cavanagh A S, et al. Nanoscale Interface Modification of LiCoO2 by Al2O3 Atomic Layer Deposition for Solid-State Li Batteries[J]. Journal of the Electrochemical Society, 2012, 159(7):A1120-A1124.
[24] Jin Y, Mcginn P J. Li7La3Zr2O12, electrolyte stability in air and fabrication of a Li/Li7La3Zr2O12/Cu0.1V2O5, solid-state battery[J]. Journal of Power Sources, 2013, 239(10):326-331.
[25] Li Y, Chen X, Dolocan A, et al. Garnet Electrolyte with an Ultralow Interfacial Resistancefor Li-Metal Batteries[J]. Journal of the American Chemical Society, 2018, 140(20): 6448-6455.
[26] Shao Y, Wang H, Gong Z, et al. Drawing a Soft Interface: An Effective InterfacialModification Strategy for Garnet-Type Solid-State Li Batteries[J]. ACS Energy Letters, 2018, 3(6): 1212-1218.
[27] Tai C L, Roddatos V, Vinod C C, et al. Li7La3Zr2O12 Interface Modification for Li-dendrite Prevention[J]. ACS Applied Materials & Interfaces, 2016, 8(16):10617–10626.
[28] Kotobuki M, Munakata H, Kanamura K, et al. Compatibility of Li7La3Zr2O12 Solid Electrolyte to All-Solid-State Battery Using Li Metal Anode[J]. Journal of the Electrochemical Society, 2010, 157(10):A1076-A1079.
[29] Wakayma H, Yonekura H, Kawai Y. Three-Dimensional Bicontinuous Nanocomposite from a Self-Assembled Block Copolymer for a High-Capacity All-Solid-State Lithium Battery Cathode[J]. Chemistry of Materials, 2016, 28: 4453–4459.
[30] Ohta S, Komagata S, Seki J, et al. All-solid-state lithium ion battery using garnet-type oxide and Li3BO3, solid electrolytes fabricated by screen-printing[J]. Journal of Power Sources, 2013, 238(28): 53-56.
[31] Kato T, Hamanaka T, Yamamoto K, et al. In-situ, Li7La3Zr2O12 /LiCoO2, interface modification for advanced all-solid-state battery[J]. Journal of Power Sources, 2014, 260(16): 292-298.
[32] Jan V D B, Afyon S, Rupp J L M. Interface‐Engineered All Solid State Li Ion Batteries Based on Garnet Type Fast Li+ Conductors[J]. Advanced Energy Materials, 2016, 6(19): 1600736.
[33] Wang C, Zhang L, Xie H, et al. Mixed Ionic-Electronic Conductor Enabled Effective Cathode-Electrolyte Interface in All Solid State Batteries[J]. Nano Energy, 2018, 50.
[34] Dong T, Zhang J, Xu G, et al. A multifunctional polymer electrolyte enables ultra-long cycle-lifein a high-voltage lithium metal battery[J]. Energy & Environmental Science, 2018, 11(5): 1197-1203.
[35] Wei Z, Chen S, Wang J, et al. A large-size, bipolar-stacked and high-safety solid-state lithium battery with integrated electrolyte and cathode[J]. Journal of Power Sources, 2018, 394: 57-66.
[36] Wang L P, Zhang X D, Wang T S, el. Ameliorating the Interfacial Problems of Cathode and Solid‐State Electrolytes by Interface Modification of Functional Polymers[J]. Advanced Energy Materials. 2018, 8, 1801528
[37] Liu Y, Li C, Li B, et al. Germanium Thin Film Protected Lithium Aluminum Germanium Phosphate for Solid‐State Li Batteries[J]. Advanced Energy Materials, 2018, 8(16): 1702374.
[38] Palacin M R. Recent advances in rechargeable battery materials: Achemist's perspective[J]. Chemical Society Reviews, 2009, 38(9): 2565-2575.
[39] Patil A, Patil V, Wook S D, et al. Issue and challenges facing rechargeable thin film lithium batteries[J]. Materials Research Bulletin, 2008, 43(8–9): 1913-1942.
[40] 李杨, 丁飞, 桑林, 等. 全固态锂离子电池关键材料研究进展[J]. 储能科学与技术, 2016, 5(5): 615-626.
Li Y, Ding F, Sang L, et al. A review of key materials for all-solid-state lithium ion batteries[J]. Energy Storage Science and Technology, 2016, 5(5): 615-626.
[41] 张波, 崔光磊, 刘志宏,等. 无机固态锂电池专利分析[J]. 储能科学与技术, 2017, 6(2):307-315.
Zhang B, Cui G, Liu Z H, et al. Patentmetrics on lithium-ion battery based on inorganic solid electrolyte[J]. Energy Storage Science and Technology, 2017, 6(2): 307-315.
[42] Jeffrey L, Yongming S, David G.M, et al. A Dual-Crosslinking Design for Resilient Lithium-Ion Conductors[J]. Advanced Materials. 2018, 30, 1804142.

Options

文章导航

模态框（Modal）标题

摘要

本文引用格式

Abstract

参考文献