欢迎访问过程工程学报, 今天是
新能源产业发展专栏

新能源电池领域导电剂技术的研究与产业化

  • 袁佩玲 ,
  • 丁星星 ,
  • 郭鹏 ,
  • 张彩丽 ,
  • 胡锐
展开
  • 1. 中原工学院物理与光电工程学院,河南 郑州 450007 2. 中原工学院建筑与工程学院,河南 郑州 450007 3. 河南省金属燃料电池重点实验室,河南 郑州 450000 4. 中国科学院合肥物质科学研究院固体物理研究所,安徽 合肥 230031

收稿日期: 2023-04-12

  修回日期: 2023-08-08

  网络出版日期: 2023-09-01

基金资助

新一代锂电池用单壁碳管导电剂的关键技术研发和应用研究

Research and industrialization of conductive additive technology in the field of new energy batteries

  • YUAN Pei-Ling ,
  • DING Xing-Xing ,
  • GUO Peng ,
  • ZHANG Cai-Li ,
  • HU Rui
Expand
  • 1. College of Physics and Optoelectronic Engineering, Zhongyuan University of Technology, Zhengzhou, Henan 450007, China 2. The School of Civil Engineering and Architecture, Zhongyuan University of Technology, Zhengzhou, Henan 450007, China 3. Henan Provincial Key Laboratory of Metal Fuel Cell, Zhengzhou, Henan 450000, China 4. Institute of Solid State Physics, Hefei Institutes of Physical Science, Chinese Academy of Sciences, Hefei, Anhui 230031, China

Received date: 2023-04-12

  Revised date: 2023-08-08

  Online published: 2023-09-01

摘要

二次电池已经被广泛开发并应用于各种领域,如大规模储能、便携式电子设备和电动汽车。作为锂离子电池的重要组成部分,主要通过构建导电网络来增加和保持电极的电子导电性,从而有效改善电池的电化学性能。导电剂虽然在锂离子电池成本的占比较小(2%左右),但相比于数十万亿级别的锂离子电池产业,导电剂也随之成为了千亿级别的产业。目前,主流导电剂为炭黑类、导电石墨类、气相生长碳纤维(VGCF)、碳纳米管和石墨烯。其中,炭黑类、导电石墨类和VGCF作为传统导电剂,其在活性物质间可形成点、线接触式导电网络;碳纳米管和石墨烯属于新型导电剂材料,其可分别形成线、面接触式导电网络。相对于单一导电剂,复合导电剂可使不同导电剂之间产生协同效应,从而表现出更优异的性能,因此新型导电剂与传统导电剂是高度统一的关系,在成本及性能的综合考量下,未来导电剂体系将逐步从单一化走向多元复合化。此外,我国导电剂长期依赖进口,近年来一些优秀企业在制备方法和分散技术方面逐步打破工艺壁垒,加速国产化进程。本工作将讨论碳纳米材料作为导电剂用于电池领域并改善电池电化学性能的相关工作,并进一步讨论导电剂的产业化现状前景。

本文引用格式

袁佩玲 , 丁星星 , 郭鹏 , 张彩丽 , 胡锐 . 新能源电池领域导电剂技术的研究与产业化[J]. 过程工程学报, 2023 , 23(8) : 1118 -1130 . DOI: 10.12034/j.issn.1009-606X.223115

Abstract

Secondary batteries have been widely developed and used in various fields, such as large-scale energy storage, portable electronic devices, and electric vehicles. Conductive additives, as an important component of lithium-ion batteries, could increase and maintain the electronic conductivity of the electrodes by constructing a conductive network, which will effectively improve the electrochemical performance of batteries. Although conductive additives account for a relatively small proportion of the cost of lithium batteries (around 2%), compared to the trillion level lithium battery industry, conductive additives have also become a trillion level industry. At present, the mainstream conductive additives are carbon black, conductive graphite, vapor grown carbon fiber (VGCF), carbon nanotubes, and graphene. They are ideal conductive additives for lithium-ion batteries because of superior properties such as low weight, high chemical inertness, and high specific surface area. Among them, carbon black, conductive graphite, and VGCF are traditional conductive additive materials that form point and line contact conductive networks between active materials; carbon nanotubes and graphene belong to new conductive additive materials, which respectively form wire and surface contact conductive networks between active materials. Compared to a single conductive agent, composite conductive agents create synergistic effects between different conductive agents, thus exhibiting better performance. Therefore, we believe that the new conductive agent has a highly unified relationship with traditional conductive agents. Taking into account both cost and performance, the future conductive agent system will gradually shift from singularity to multiple composites. In addition, China's conductive agents have long relied on imports. In recent years, some excellent enterprises have gradually broken through process barriers in preparation methods and dispersion technologies, accelerating the process of localization. This article will discuss the related work of using carbon nanomaterials as conductive additives in the field of batteries and improving their electrochemical performance. Then, further discuss the industrialization status and prospects of conductive additives.
文章导航

/